Hello everybody
Unfortunately I lost the machine constants of my Maho 500 C (Philips 432)....
I always had the machine connected to a power source but I hadn’t switched it on for a while.
I thought as long as its connected to the power supply, the parameter could not get lost.
Well, I guess that was a fatal mistake.
I think that the batter that is necessary for the protection of the machine constants is not working properly anymore.
So I want to change it. Does anybody know where I can get it from?
What would that costs?
And where exactly is that battery located?
Would be nice if anybody could help me out!
Regards
JLS
Thread: spare battery for Maho 500 C
Results 1 to 3 of 3
-
11-11-2011, 08:05 PM #1
- Join Date
- Jun 2011
- Posts
- 42
-
11-11-2011, 10:09 PM #2
Administrator
- Join Date
- Dec 2001
- Posts
- 5151
Hello JLS
It’s a lead battery. Depending on the controller type you need to have a special one.
You can find the battery over the technical information with Google. You should get a one that matches the technical data of your current battery.<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.
-
11-22-2011, 11:59 PM #3
- Join Date
- Jul 2005
- Posts
- 35
Morning
I finally found time yesterday to build in the spare battery that I bought. It did not cost a lot...
After building it in, I first got quite scared: when turning on the machine, the screen first stayed black for quite a while.... Maybe the controller had to load or something like that.
Afterwards I “quickly” tipped in the parameter and... it worked =)
Many thank for your help!
Regard
JLS
Reply With Quote
Posting Permissions
