Hello guys
I would like to know how to set up the WS zero point on a Heidenhain-iTNC 530 controller..
The machine cannot see in which direction the WS is clamped so that position must be found somehow... I am looking forward to helpful answers...
Kind regards
CNC newbie 19
Thread: adjust work piece zero point
Results 1 to 3 of 3
-
02-19-2012, 06:15 PM #1
- Join Date
- Feb 2012
- Posts
- 4
-
02-19-2012, 06:25 PM #2
CNC-Arena Award Winner 2011
- Join Date
- Oct 2006
- Posts
- 3342
I would suggest probing with the 3D sensor..
Just as an idea...
(PS: the machine only des what you tell it to so... so hence you should know where the part is positioned)<b><!--sizeo:5--><span style="font-size:18pt;line-height:100%"><!--/sizeo-->Gruß General<!--sizec--></span><!--/sizec--></b><br /><br /><br /><br /><!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><b>Fräser sind Halbgötter in Blau.<br />Denn sie lassen durch Zerstörung Neues entstehen!!!!</b><!--sizec--></span><!--/sizec--><br /><br /><br /><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo--><u>Werbung in eigener Sache:</u><!--sizec--></span><!--/sizec--><br /><i><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->Enter the Matrix an feel the Moment "<u>www.pixxelmatrix.de</u>"<!--sizec--></span><!--/sizec--></i>
-
02-19-2012, 07:22 PM #3
- Join Date
- Feb 2009
- Posts
- 170
Or, like in my apprenticeship with a tool
Tik-tak :daumup:
Reply With Quote
Posting Permissions
