Hello colleagues
I have a machine with an old 332 Heidenhain controller which is connected serially to the PC .
Cimco is installed on the PC.
Now the programs are written with continuous number and another digit is added after the 2nd processing.
e.g. . 4001.h, 40012.h, 40013.h and so on..
The programs are then send from the machine and deleted.
If the part comes again then the individual programs have to be played back.
I want that the programs are saved in a file so that I only have to call one program and further adoptions come along automatically
I know that this is possible but I don’t know how to do it.
Regards
Schmiddi