Hello everyone
I have deleted row MP960.0, I cannot inset a row anymore.
Then MP960.1 is displayed and I cannot change that.
Can anybody tell me how to do it?
And when that is done successfully, how can I make the machine to read out the value again.
Many thanks in advance
Regards
Scherco
Thread: delete zero point Heidenhain
Results 1 to 3 of 3
-
04-07-2012, 11:24 AM #1
- Join Date
- Nov 2004
- Posts
- 439
-
04-07-2012, 01:58 PM #2
Administrator
- Join Date
- Dec 2001
- Posts
- 5151
Hello
Why do you change the machine zero point when you have done that before?
Use the softkey “insert row/word” (2.soft keybar) :wacko:
You can simplify the whole thing when you do it externally over the network/pc and read out the MPs over the network, edit it with the editor and write it back e.g. with TNCRemo.<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.
-
04-07-2012, 02:04 PM #3
- Join Date
- Nov 2004
- Posts
- 439
No, I only wanted to look up something and I did not notice that I was in the wrong window.
I went out with end and suddenly it was gone... With the soft key I only get one row MP 960.1.... I cannot change the value in MP 960.0.
Reply With Quote
Posting Permissions
