Hello
I plan to move to a different firm and now I had a different software ( MillPlus) for 9 months and I wanted to practice.
However, the software that you can download doesn’t work.
I would really like to practice at home again to make the move as easy as possible…
When having my trial day, I already made a silly mistake:
I wanted to program a 33 degree angle with FK and ..well I messed it up…
I was so used to ICP from Millplus that I did not do it correctly…
Can anybody help me out??
Thank you in advance
Thread: PC software doesnt' work...
Results 1 to 4 of 4
-
09-22-2011, 03:42 PM #1
- Join Date
- Jan 2008
- Posts
- 13
-
09-22-2011, 04:02 PM #2
- Join Date
- Jan 2008
- Posts
- 13
I have to add I only have a netbook. But I think 1.6Ghz should be enough anyway.
-
09-22-2011, 04:04 PM #3
- Join Date
- Feb 2007
- Posts
- 4191
Hello
What exactly is the problem with the software?
What errors?
Can you not even start it`?
What operating system do you have on your computer?Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
-
09-22-2011, 04:12 PM #4
- Join Date
- Jan 2008
- Posts
- 13
Thank you for your quick answer…
I either download the wrong file or so.. I don’t know.
I had a USB stick from the AMB , I was able to open the program, but not use it….
Thank you for your quick answer…
I either download the wrong file or so.. I don’t know.
I had a USB stick from the AMB , I was able to open the program, but not use it….
Reply With Quote
Posting Permissions
