[Holterdipolter]

Hello,

I want to read out a programmed feed on a 840D SL program which I have programmed in the main block after the tool change.

I still find myself in rapid traverse and need the programmed feed rate in a self-written
UP and I don’t want to write it again.
Can someone give me the system variable or parameter name where the feed is stored?

Thank you in advance

[fräsmurml]

Hello,


The parameters for the current programmed feedrate is $ P_f.

e.g.

R1 = $ P_f

now the feed should be stored in R1.

greetings


Fräsmurml