Hello
I’ve got a problem with the thread cycle.
Our machine always writes an error message in the simulation area. Here it is: 12489 channel 1 clause subprogram already defined.
It would be great if someone helped.
Greetings
Thilo
Hello
I’ve got a problem with the thread cycle.
Our machine always writes an error message in the simulation area. Here it is: 12489 channel 1 clause subprogram already defined.
It would be great if someone helped.
Greetings
Thilo
Well, it’s already called somewhere. Make as follows:
Start the program, when the error occurs “NC-stop” is coming, then choose “program correction” or “correction clause”.
The program editor will open and the cursor will stand at the program clause with the error. At least it has to work this way. The error is some where in the line.
Gruß,<br /><br />Drehpapst<br /><br /><br />Willen braucht man. Und Zigaretten.<br />Wer Visionen hat, sollte zum Arzt gehen.<br />Helmut Schmidt
Maybe you should first adjust machine data via simulation menu.