586,096 active members*
3,797 visitors online*
Register for free
Login

Thread: M command for switching-on of cooling air

Results 1 to 5 of 5
  1. 07-20-2009, 07:46 PM #1
    MotorsportKlaus
    MotorsportKlaus is offline
    Join Date
    Jun 2009
    Posts
    23
    Hello

    I lent my manual guides out and now I have to mill tool steel!

    I don’t know the M-command anymore!

    I need the M-commands for switching-on/off.

    It’s something with M82, isn’t it?
    Reply With Quote Reply With Quote
  2. 07-20-2009, 07:58 PM #2
    uli12us
    uli12us is offline Junior Member
    Join Date
    Apr 2002
    Posts
    5003
    Just try everything out. Such things are declared by the manufacture. Nobody can answer your question until one knows what machine it is exactly.
    Reply With Quote Reply With Quote
  3. 07-20-2009, 08:04 PM #3
    MotorsportKlaus
    MotorsportKlaus is offline
    Join Date
    Jun 2009
    Posts
    23
    It’s spinner VC560 with 810D, year of manufacture 2004
    Reply With Quote Reply With Quote
  4. 07-20-2009, 09:07 PM #4
    schlosserkopf
    schlosserkopf is offline
    Join Date
    Jun 2009
    Posts
    12
    Hello

    I’m new here and I’d like to introduce myself.

    I’m Stefan, 27, I work at Spinner VC 810 and Hedelius RS 60.

    About your question. There’re 2 possibilities. Air through the spindle (option) M74 on and M75 off or air next to the spindle M85 on and M86 off. It works this way with my machine, year of manufacture 2005 and the same for our second VC.

    I hope it’ll help you
    Greetings
    Reply With Quote Reply With Quote
  5. 07-21-2009, 09:11 AM #5
    MotorsportKlaus
    MotorsportKlaus is offline
    Join Date
    Jun 2009
    Posts
    23
    Thanks! M85 and M86 were correct!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules