Hello
I lent my manual guides out and now I have to mill tool steel!
I don’t know the M-command anymore!
I need the M-commands for switching-on/off.
It’s something with M82, isn’t it?
Hello
I lent my manual guides out and now I have to mill tool steel!
I don’t know the M-command anymore!
I need the M-commands for switching-on/off.
It’s something with M82, isn’t it?
Just try everything out. Such things are declared by the manufacture. Nobody can answer your question until one knows what machine it is exactly.
It’s spinner VC560 with 810D, year of manufacture 2004
Hello
I’m new here and I’d like to introduce myself.
I’m Stefan, 27, I work at Spinner VC 810 and Hedelius RS 60.
About your question. There’re 2 possibilities. Air through the spindle (option) M74 on and M75 off or air next to the spindle M85 on and M86 off. It works this way with my machine, year of manufacture 2005 and the same for our second VC.
I hope it’ll help you
Greetings
Thanks! M85 and M86 were correct!