Hello

I’ve got a problem with planar cut-in.
Every time I try to make it, an error occurs: 061603 cut-in form isn’t correctly defined. The chisel is defined with cutter 1 form 2 and cutter 2 form 3.
It seems to me that I made everything correctly, according to the instruction. But probably something isn’t right.
Could anybody help?

Regards, Jan


Example:
G18G0
G54
G75X1=0Z1=0
T5
G96S120LIMS=2000F0.12M4
G0X20Z5
CYCLE93( 50.00000, 50.00000, 10.00000, 6.00000, , , , , , , ,0.03000, 0.03000, 2.00000, ,6, )
G75X1=0Z1=0
M30