523,927 active members*
2,574 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Join Date
    Aug 2011
    Posts
    72
    Hello guys

    A few weeks ago I change my firm and now have to write programs myself... (I worked on series before) under S840C. I have a few questions regarding the commands:

    1. what does the command G451 mean when SRK is switched on (turning)?

    2. What’s the purpose of the command precision stop(apart from creating sharp changeover)
    Is it useful to probe a fit with precision stop?

    3. How do you program with powered tools e.g. to create a pitch cycle holes?

    Would be nice if anybody could help me out!

    Kind regards

  2. #2
    hapo
    Guest
    Have a look here :

    http://www.automation.siemens.com/doconweb...101_e&scope=all

    You dont seem very up to date.. have you ever written an NC program before? Or adjusted one?

  3. #3

    Join Date
    Aug 2011
    Posts
    72
    I am a kind of newbie.. I have written a few programs before. The link is nice but doesn’t help me out unfortunately..thank you anyway
    Kind regards

  4. #4

    Join Date
    Jul 2008
    Posts
    921
    Hello

    I think it would be useful if you participate on a trainings course.. your new firm might help you to find a suitable course.. I mean it’s useful for them too to have a worker that knows what he is doing! I don’t think it has to be a 840C trainings course- it seems like you are lacking the basic knowledge... maybe a DIN programming course would be useful to start off with...

    Good luck with your new position
    Michael

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •