Hallo TripleM,
your contribution has been placed at the PowerMill-forum...
A transmission of PP's is not legitimate - you should know this. If you didn't know until now - you know it,yet!
Here is Know-how and work in it and PP's are tailored normally at a certain machine and the relative customer.
Turn to Delcam directly, as a supply of service if you'd like to change the PP's... or ask the roduct advisor of the Powermill-forum.
<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.