Hello
I created a 3d spiral surface [attachment=4314:Spiralblech.jpg] with help of coordinate curves (x,y,z) ([attachment=4315:Spirale1.txt],[attachment=4316:Spirale
2.txt])
This spiral ha to be made from steelplate. Therefore I have to bring the spiral into a level in Solid Edge. But I can’t do it. The simple view from above doesn’t reproduce the real dimensions of the spiral surface because of the 3d-form, (does it?)
I hope someone has experienced a similar problem and can help me.
Results 1 to 3 of 3
-
03-26-2009, 12:13 PM #1
- Join Date
- Mar 2009
- Posts
- 4
-
03-26-2009, 04:14 PM #2
Junior Member
- Join Date
- Jan 2003
- Posts
- 46
Hello
If it doesn’t necessary have to be in Solid Edge… here’s the blank as DXF (made in AutoCAD2000 or BricsCAD V9)
Good luck!
Jochen
-
04-06-2009, 10:53 AM #3
- Join Date
- Mar 2009
- Posts
- 4
Thanks for your reply! I calculated plane coordinate curves and drew on.
Reply With Quote
Posting Permissions
