502,202 active members
7,359 visitors online
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Hello

    I’ve got a problem with my old Maoh Hansen sinking EDM machine in case of LBL programming.
    An example

    TOOL CALL 1
    CYCL DEF
    LBL 1
    ngfoji
    LBL 0
    TOOL CALL 2
    CALL LBL 1 Rep 1

    The machine takes tool 1 erodes everything ok
    The machine takes tool2 erodes everything ok
    Then it wants to use the tool 2 again

    It ignores LBL 0 somehow.
    Does anyone have a clue?

    Thanks in advance
    Greetings

  2. #2
    Don’t you happen to have the LBL call in LBL?
    Show your program. It’ll be easier to help then
    Greetings

  3. #3
    Don’t you happen to have the LBL call in LBL?
    Show your program. It’ll be easier to help then
    Greetings
    No, everything is properly, as it should be.

  4. #4
    Show your program.
    It would be easier to understand.

    Or is your program strictly confidential?
    gruß Klaus

  5. #5
    Administrator CNCFanatiker's Avatar
    Join Date
    Dec 2001
    Posts
    5128
    Hello Hans-Michael

    Write your LBL after M30 at the end of the program and call it by T1 and T2 with LBL CALL.
    <b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.

  6. #6
    I have already tried that.
    The machine doesn’t know M02 or M30.

    I programmed LBL after M30 when all LBL had been completed.
    The machine processed the LBL with the last EL.

  7. #7
    IT WORKS!

    I wrote LBL after STOP
    And now it works

    Thanks

  8. #8
    Hello
    I would leave Rep 1 out and only write CALL LBL 1

    Regards, Armin Rauleder
    <a href="http://www.ar-com.de/" target="_blank">http://www.ar-com.de/</a>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •