Hello
I’ve seen a chuck smaller than ER11 on a trade fair. I have to clamp max. D4. If someone knows the name, link or address, I would appreciate it very much.
Greetings
Roman Moor
Thread: The smallest chuck for D4
Results 1 to 6 of 6
-
10-15-2009, 02:30 PM #1
- Join Date
- Mar 2007
- Posts
- 292
-
10-15-2009, 02:46 PM #2
Junior Member
- Join Date
- Aug 2003
- Posts
- 371
Hello Roman
The name of the size is ER08 and it exists up to diameter 4,5 as I know.
You’ll find in the catalogue of WNT.
The outer diameter of the chuck is 12mm. I know from experience that you should have tender hands, otherwise it’ll break down very quickly.
Regards, DirkDirk Jacob<br />KST Kraftwerks- und Spezialteile GmbH<br />Hertzstrasse 74-75<br />13158 Berlin<br />Tel.: 030/ 9177-2665<br />Fax.:030/ 9177-2807<br />email: [email protected]<br />web: www.kst-berlin.de
-
10-15-2009, 03:48 PM #3
Junior Member
- Join Date
- Apr 2002
- Posts
- 5003
I have worked with a Proxxon. It has a size of max. 3mm. but it was very useful occasionally.
-
10-15-2009, 04:03 PM #4
- Join Date
- Feb 2007
- Posts
- 4191
HelloHello
I’ve seen a chuck smaller than ER11 on a trade fair. I have to clamp max. D4. If someone knows the name, link or address, I would appreciate it very much.
Greetings
Roman Moor
I don’ know whether it’ll help you
http://www.enpro-gmbh.de/Werkzeuge_spannen..._din6499b_.html
Regards, InTexEine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
-
10-15-2009, 04:10 PM #5
- Join Date
- Dec 2007
- Posts
- 198
We’ve got one by Schunk
BIG New Baby Chuck
[attachment=5698:Baby_Chuck.jpg]
-
10-15-2009, 07:13 PM #6
- Join Date
- Aug 2007
- Posts
- 66
It’s by Schunk, too, but even slimmer.
http://www.schunk.com/schunk_files/attachm...HSK-A_DE_EN.pdf
Reply With Quote
Posting Permissions
