Hello,
im not shure if its the right subforum, but im new here and found nothing more better fitting.
i want to build my first CNC now and got the Mach3 interface board BL-Mach-v1.1 D402 (the green 5 axis breakout board by sainsmart)
I found some documents on the net, but they dont explain me exact how to wire it to my microstep driver (M542) or i dont understand it yet.
there are 4 pins for each axis on the breakout board (+5V // CLK // CW //EN)
and 6 inputs on the microstep driver (PUL+ (+5V) // PUL- (PUL) // DIR+ (+5V) // DIR- // ENA+(+5V) // ENA- (ENA) )
how they are connected?
Picture from both; IMG_20140715_134751.jpg - directupload.net
it would be great if someone could help me.
(and if its the wrong froum, please excuse me and maybe you are able to move the thread)
Thanks in advance!
Greetings,
CNDaniel