Sound Dampening
If you have your own shop in your home you could use standard carpeting on the walls and surounding areas. Just make sure you have good ventilation for you and the machine (fire and health hazards etc.). You also want to put shielding/plexy around the machine to prevent chips and coolant from making a mess of the carpeting. I use this method in my garage so the neighbores don't complain at 3am. You never know when a great idea may wake you from a dead sleep.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com