If the cap is blowing right off the bat, it is probabally due to a start winding problem/short circuit. Or the switch is welded shut.
The caps are not polarized, (or shouldn't be).
Al.
Results 1 to 20 of 35
Threaded View
-
08-11-2006, 08:26 PM #12
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
how to connect single phase spindle motor with 3 phase inverter
By pdsherathia in forum Benchtop MachinesReplies: 10Last Post: 01-19-2014, 07:15 PM -
Convert three phase transformer to single phase?
By jimjovan in forum CNC Machine Related ElectronicsReplies: 5Last Post: 09-16-2013, 11:32 PM -
Vacuum Former Change from 3 phase to Single Phase
By the1toyplace in forum CNC Machine Related ElectronicsReplies: 90Last Post: 11-19-2012, 03:46 AM -
fitting a 110v or 220v single phase spindle motor on a 3 phase machine
By mwood3 in forum Benchtop MachinesReplies: 12Last Post: 10-13-2009, 03:53 AM -
CONVERT SINGLE 240/480V POWER TO THREE PHASE 415V OUTPUT
By PhaseChangeConv in forum News AnnouncementsReplies: 0Last Post: 09-03-2008, 05:45 AM
Tags for this Thread
Posting Permissions
