Hello
I’ve got a Deckel FP4 NC.
When I run up with 100%, the Z and Y axes make loud noise but the X axis is quiet. What could be the reason? Belt? Tightener?
Thanks in advance
Kickinger
Hello
I’ve got a Deckel FP4 NC.
When I run up with 100%, the Z and Y axes make loud noise but the X axis is quiet. What could be the reason? Belt? Tightener?
Thanks in advance
Kickinger
HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at