Hello everybody!
We’ve got a Chiron FZ-16 and we can’t start it (assembling of the tool magazine etc.). The controller Sinumerik system 3 (M) with 4 axes (turntable). We’re looking for an expert who could help us. So if someone has interest, please get in touch.
Regards, Andreas
Thread: Start-up of Chiron (1985)
Results 1 to 3 of 3
-
03-02-2010, 08:31 PM #1
- Join Date
- Oct 2008
- Posts
- 12
-
03-11-2010, 06:35 PM #2
- Join Date
- Feb 2007
- Posts
- 36
HelloHello everybody!
We’ve got a Chiron FZ-16 and we can’t start it (assembling of the tool magazine etc.). The controller Sinumerik system 3 (M) with 4 axes (turntable). We’re looking for an expert who could help us. So if someone has interest, please get in touch.
Regards, Andreas
What exactly doesn’t work?
If it’s the changer, then probably I can help.
Greetings
Heiko
-
03-11-2010, 07:48 PM #3
- Join Date
- Oct 2008
- Posts
- 12
Hello HeikoHello
What exactly doesn’t work?
If it’s the changer, then probably I can help.
Greetings
Heiko
We’re not familiar with the process sequence of the changer. Step-by-step operating manual neither helps us. We don’t know whether a pneumatic valve was switched because of transport.
I believe we need a briefing for the machine. Have you worked with such a thing?
Greetings
Andreas
Reply With Quote
Posting Permissions
