I just purchased a Bridgeport with a boss 8 control. I drew a simple rectangle with a .5 radius on the corners. I am using right tool comp. I get two corners that cut correctly. 1 corner that cuts at a 45 and the other is the start point I think I need a lead in there. As you could guess I an new at this. I have a CNC laser with mach3 that runs fine. Wondering if it is the post?? Bobcad 21
I just purchased a Bridgeport with a boss 8 control. I drew a simple rectangle with a .5 radius on the corners. I am using right tool comp. I get two corners that cut correctly. 1 corner that cuts at a 45 and the other is the start point I think I need a lead in there. As you could guess I an new at this. I have a CNC laser with mach3 that runs fine. Wondering if it is the post?? Bobcad 21
Gary
The post may need a little tweek in the Setup Driver. That doesn't seem like it should be doing that either. If the G-Code is right it should cut all four Radii no problem.
Post a Cad File and G-Code in the BCC Forum their are a lot of guys there to help you. I don't know anything about a Boss 8 Control
Post in the BobCad-Cam Forum http://216.117.147.20/bobcadsupport/forums/index.php
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.