hi, i am amking 2 axis cnc machine ....i need to know that if i want diagonal movement (i.e between x and y axis) then what should be the gcode for this.....like we have G00 and G01 for linear motion...so ids there any gcode for diagonal motion ? if not then how can i achieve diagonal motion?
plz help me out...
Thread: gcode for diagonal movement??
Results 1 to 2 of 2
-
07-18-2014, 04:39 PM #1
Junior Member
- Join Date
- Jul 2014
- Posts
- 5
gcode for diagonal movement??
-
07-18-2014, 06:57 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: gcode for diagonal movement??
G1 X0 Y0
G1 X5 Y5 >>>> This will move at 45°Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Similar Threads
-
How to tell system to offset movement in X/Y for a part that's not square (GCODE)
By photomankc in forum Uncategorised MetalWorking MachinesReplies: 3Last Post: 03-24-2012, 01:19 PM -
Problema al cortar en diagonal
By perico5000 in forum SpanishReplies: 4Last Post: 03-29-2011, 09:10 PM -
MB3-screen goes diagonal sometimes
By underdog in forum HURCOReplies: 2Last Post: 01-16-2011, 05:35 PM -
Diagonal Line Coordinates and Posts
By Mike RZMachine in forum Dolphin CAD/CAMReplies: 2Last Post: 11-05-2009, 09:37 PM -
Mach3 shooting off in diagonal
By Malkaelan in forum Mach Software (ArtSoft software)Replies: 2Last Post: 05-09-2009, 04:44 PM
Tags for this Thread
Posting Permissions
