Hello everyone,
This is for a telescope project I am working on. I do not have the time or space on my CNC mill to do this so I wanted to see if anyone was interested in quoting. I attached a .dxf and jpg 3D image. Email me for a Solid Works file. The material will be .250" thickness aluminum, any grade is fine. Finish is not critical, but clean would be nice. The three holes are to be tapped 3/8-16 2b typical. There is also a .0625 chamfer around all edges on both sides. Please provide quote and lead time. I'm in no rush. Thank you. Any questions please send them to me. I only need one unit made right now.
Regards,
Phil
Thread: Rfq Machined Aluminum Plate
Results 1 to 7 of 7
-
08-20-2006, 08:03 PM #1
Registered
- Join Date
- Oct 2004
- Posts
- 39
Rfq Machined Aluminum Plate
-
08-21-2006, 01:24 AM #2
Registered
- Join Date
- Apr 2006
- Posts
- 100
E-mail me the Solidworks file And I'll quote this for you.
Thanks Mike
[email protected][email protected]
www.hessemachine.com
-
08-22-2006, 01:37 AM #3
Registered
- Join Date
- Apr 2005
- Posts
- 345
Phil - can you save it as an IGES or STEP file? Send it to zcases<at>frontiernet.net
Thanks
Scott
-
08-22-2006, 01:38 AM #4
Registered
- Join Date
- Apr 2005
- Posts
- 345
Actually if I just knew the OD I could give you a price from that.
Scott
-
08-22-2006, 01:40 AM #5
Member
- Join Date
- Aug 2006
- Posts
- 52
OD is 10 inch
-
08-22-2006, 02:02 AM #6
Registered
- Join Date
- Apr 2005
- Posts
- 345
Thanks Solgood........Philip I will PM you soon.........
-
08-22-2006, 04:15 AM #7
Registered
- Join Date
- Oct 2004
- Posts
- 39
RFQ Machined aluminum plate
Hello everyone,
Thank you all for your time and responses to this post. I have decide on a vendor and this quote is now closed. Thank you.
Regards,
Phil
Reply With Quote
Posting Permissions
