I have a servo motor with 1000 line encoder and a 20 teeth pulley on the shaft connected to a chuck with a 5mm pitch belt and a 60 teeth pulley that rotates to a ratio 3:1
my question is what are the settings in Mach3?
regards
Ivan
Thread: setting in Mach3 with 4th axis
Results 1 to 1 of 1
-
08-07-2014, 09:51 AM #1
Registered
- Join Date
- Jan 2012
- Posts
- 12
setting in Mach3 with 4th axis
Reply With QuoteSimilar Threads
-
Problem setting up X-axis Home function with Mach3
By mikefalkner in forum Mach Software (ArtSoft software)Replies: 2Last Post: 05-05-2013, 05:17 PM -
z axis setting on the main screen of mach3
By woodman08 in forum Mach MillReplies: 6Last Post: 02-03-2013, 04:16 PM -
Setting up a 4th axis in Mach3
By widgitmaster in forum Mach Software (ArtSoft software)Replies: 7Last Post: 09-04-2012, 09:58 PM -
Setting up X and Y G540/Mach3
By ssutton in forum DIY CNC Router Table MachinesReplies: 4Last Post: 03-08-2011, 12:46 AM -
Basic Q's / Setting up Mach3
By Thorpydo in forum Mach MillReplies: 3Last Post: 09-25-2008, 01:25 AM
Tags for this Thread
Posting Permissions
