[krymis]

guys,

i am using my demo versions of bobcad/cam 19 and 21 (my registered version didn't come yet) for this tutorial but i need a step by step tutorial on how to design this box in the first place. I really need your help to learn how to do the design on this box to understand my new software. The site is located at
http://www.mdaprecision.com/CNC%20Zo...0tutorial.html

[lakeside]

you should look at the trainning cd set from bobcad where you are just starting out it will help a lot.As for your box open Bobcad go to the "Other Menu"-Rectangal

[tobyaxis]

guys,

i am using my demo versions of bobcad/cam 19 and 21 (my registered version didn't come yet) for this tutorial but i need a step by step tutorial on how to design this box in the first place. I really need your help to learn how to do the design on this box to understand my new software. The site is located at
http://www.mdaprecision.com/CNC%20Zo...0tutorial.html

Also to add to Mikes post BobCad has their own Support Website. There are lots of BCC users there that will help you.

http://216.117.147.20/bobcadsupport/forums/index.php

[krymis]

found sorin's video stash and man did i learn an awsome amount of stuff. Not only did I make that part but i made the code for it too. I can't wait to play with my actual software.

[bill south]

krymis;
Where did you find sorin's stash. Been looking for it to no avail.
Thx
Bill

[tobyaxis]

krymis;
Where did you find sorin's stash. Been looking for it to no avail.
Thx
Bill

Bill they are here in the Tutorials Thread. I also posted a link in the BobCAD Forum.


http://www.cnczone.com/forums/showthread.php?t=16774

:cheers: