SO I have a 6x26 knee mil l from grizzly. Ive decided to cnc it. This will be my 3 conversion but first knee mill. My last was a G0704 that still sits in my garage.
The quill has a movement of 3 inches. Thats not very much.
I was wondering What problems will I run into automating the knee its self. Why dont people do it more?
Grizzly.com
Results 1 to 1 of 1
-
08-14-2014, 02:16 PM #1
Registered
- Join Date
- Dec 2013
- Posts
- 47
Grizzly G3102 Knee mill cnc retro fit quesions.
Reply With QuoteSimilar Threads
-
Finished converting Grizzly G3102
By bigvinney in forum Knee Vertical MillsReplies: 11Last Post: 03-19-2017, 03:00 AM -
Looking at buying a grizzly taiwanese knee mill
By ruawake in forum Knee Vertical MillsReplies: 1Last Post: 03-30-2013, 11:41 AM -
Grizzly G3102/3 CNC Conversion???
By Philip in forum Benchtop MachinesReplies: 8Last Post: 02-14-2010, 04:40 PM -
Grizzly G3102 conversion questions, servos, steppers, breakouts and more.
By turbostang in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 05-04-2007, 03:19 AM -
Prospects of CNC for grizzly knee mill
By spunkrat in forum Uncategorised MetalWorking MachinesReplies: 6Last Post: 06-04-2004, 05:17 AM
Tags for this Thread
Posting Permissions
