I have a KMB1m Can this machine run a program from my Master Cam or BobCad.
I have a KMB1m Can this machine run a program from my Master Cam or BobCad.
Sure G-Code is G-Code, all you have to do is get the post processor set to what your control likes to see in terms of how the G-Code program if formatted, If you have a program that works, then process a program from either software you have, just see how it matches the program that works, they may even work even it they are different, most Cam software company's have hundreds of Post Processors available, & most likely have one for your machine
Mactec54