I'm new to cnc and I'm trying to install my ESS smoothstepper on my computer, however I can't find instructions on how to do it. Any help or a link is very appreciated.
I'm new to cnc and I'm trying to install my ESS smoothstepper on my computer, however I can't find instructions on how to do it. Any help or a link is very appreciated.
I have got to the error window that asks you to click "no" to configure. After clicking "no", I enter the IP address and it takes me back to the click "no" to configure window. It won't get past this window. Any help or advice?
I installed one on an xp machine without issue. Maybe just make sure the ess and the network adapter are on the same subnet.
Sent from my iPhone using Tapatalk
I entered the numbers from CNC Router Parts website. What did you use? I can try that and see if it works.
There are two places that the number has to be entered, do they have to be the same in both places?
I'll check when I get back to the shop and let you know.
Sent from my iPhone using Tapatalk
Thank you! I appreciate it!
Here are the settings that worked for me. Should be all the same as the factory ones.
Attachment 245970Attachment 245972
Sent from my iPhone using Tapatalk
Thanks. Those are what I was using, but I found out I had to use the local network and not the 1394.
I think I might have it now. It's just telling me that the E-stop isn't assigned to a smoothstepper input.
I have to figure that one out now.
Glad you got it figured out.
Sent from my iPhone using Tapatalk