Hello all,
Is there anyone here skilled in the art of coding preferably for Pic micros, who could help me design firmware for 3 phase BLDC control?
I don't want it done for me I just need a hand getting started & a bit of help along the way.
I can design the hardware without too many probs, it's just the code that leaves me cold.
Why Pic? Well I've got pic design platforms & I'd rather not tool up for another micro.
Any real help would be much appreciated.
Thread: BLDC control software
Results 1 to 4 of 4
-
08-25-2006, 04:02 PM #1
Registered
- Join Date
- Aug 2006
- Posts
- 6
BLDC control software
-
08-25-2006, 07:10 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Have you by any chance looked at the application notes from PicMicro?
http://www.microchip.com/stellent/id...eId=1469&ln=en
Their site has a few examples I believe.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
08-25-2006, 11:40 PM #3
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Here is some other recent links
http://eportal.apexmicrotech.com/mainsite/pdf/EK62U.pdf
In this one, look at the references at the end.
http://www.elecdesign.com/Articles/A...3155/13155.htm
Al.lCNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
08-26-2006, 12:36 AM #4
Registered
- Join Date
- Jun 2003
- Posts
- 866
There are a couple of yahoo groups for motor control. OSMC has a lot of designers on there. The model airplane people have started building their own controllers and motors and there are some open designs. I think one of the yahoo groups groups includes LRK_ which is the initials of some of the first successful hobby motor builders. Freescale, TI, and Analog Devices have info on motor control as well as Microchip.
Reply With Quote
Posting Permissions
