There is a problem with a 2 axis Lathe
CINCINNATI MILACRON
TC 200 with Acramatic 2100
S/N (7059 A00 RR 0095)

BARFEEDER: Multifeed ML1 s/N(3380)


The problem is located at the barfeeder .
When I am using the first M62 command the barfeeder regect the remant
BUT also load the new bar and move the bar to the stopper .
I need when M62 executes ,then only to reject the remnat.

Is there any kind parameter for this ?

…………………………………
Bar Feeder program:
M82 (cather up)
G1 G62 G90 F5000 Z30 (the stopper moves back to safety distance for rejecting remnat)
M05
M80 (open chuck)
M62 (reject the remnant )
G1 G62 G90 F2000 Z0 ( the stopper moves to Z0 for the new part )
M62 (NEW BAR)
G4F5
M83
M81 (close chuck)
…………………………………….