[softail55]

I'm looking for Heidenhain TNC 370 3 axis Post Processors for Mastercam X7 or maybe earlier versions wich I can upgrade

Gonna use it to my Bridgeport VMC

[azerty002]

i have a tnc 355 iso post processor for 3X mill and it works perfectly ( thanks to BM 150 )
All what you have to do is to change the first two lines
N110 G21
N120 G0 G17 G40 G49 G80 G90
by
N110 % ''number of the program'' G71
N120 G0 G17 G40 G90
and the end
N460 M5
N470 M30
%
By
N460 M2
% ''number of the program'' G71

just fix the arc center type to absolute and the arc breaks to don't breaks arcs , allow 360 degree arcs

you had to close every mill drill cycles so the program will be little bit longer

i thinks it is a temporary solution till you found what you need

[Bm150]

i have a tnc 355 iso post processor for 3X mill and it works perfectly ( thanks to BM 150 )
All what you have to do is to change the first two lines
N110 G21
N120 G0 G17 G40 G49 G80 G90
by
N110 % ''number of the program'' G71
N120 G0 G17 G40 G90
and the end
N460 M5
N470 M30
%
By
N460 M2
% ''number of the program'' G71

just fix the arc center type to absolute and the arc breaks to don't breaks arcs , allow 360 degree arcs

you had to close every mill drill cycles so the program will be little bit longer

i thinks it is a temporary solution till you found what you need

Do you want the first and last lines changed so it outputs with the need to change?

[softail55]

Thanks for the quick reply and good information!
This will be tested, but is it not necessary with * .MMD and *.CONTROL files also to make it work?
Those located in the folder CNC_MACHINES and usually called the same as * .pst file

[azerty002]

i will be thankful

[Zub345]

For X7 TNC360

[softail55]

Perfect, thanks for that!

seems to work fine but does not write the M06 line after the tool change, anyone know how to change it?

[Bm150]

Perfect, thanks for that!

seems to work fine but does not write the M06 line after the tool change, anyone know how to change it?

Can do it if you wish?

[softail55]

Yes please

[Bm150]

Sorry, owned my mouth before looking at the files. This post is at .psb file which cannot be edited as it is encrypted.
Soz again.

[Zub345]

Sorry, owned my mouth before looking at the files. This post is at .psb file which cannot be edited as it is encrypted.
Soz again.

What needs to change?

[softail55]

What needs to change?

seems to work fine but does not write the M06 line after the tool change?

[softail55]

Sorry, owned my mouth before looking at the files. This post is at .psb file which cannot be edited as it is encrypted.
Soz again.

ok, I did not find anything either about the tool change in pst file so that explains why.

[Zub345]

I'm looking for Heidenhain TNC 370 3 axis Post Processors for Mastercam X7 or maybe earlier versions wich I can upgrade

Gonna use it to my Bridgeport VMC

Give an example Nc code and MCX file, may I help you

[tony1t]

hey.
I have a postprocessor for 530i
which cycles use your tnc330?