Is there a way to display multiple coordinate systems at the same time? For instance "Distance to Go" and "Absolute"?
Thanks for any hints!
Is there a way to display multiple coordinate systems at the same time? For instance "Distance to Go" and "Absolute"?
Thanks for any hints!
It would be a nice feature to see added, wouldn't it? You can switch the display modes now by creating an M function for it, but you likely are already doing that.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Steve,
Make a button that the runs the Macro [READOUT TOGGLE]
It toggles up to 8 axes position readouts between these 4 modes.
INCREMENTAL MODE
ABSOLUTE MODE
DISTANCE TO GO
RELATIVE TO MACHINE ZERO
Also use the PgDn keys to rotate between the G code display window and position readouts then press PgUp to blow up the readouts or G code window to full screen with large fonts.
Tech Support
CamSoft Corp.
(909) 674-8100
[email protected]
www.cnccontrols.com
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)