I need to find the pin outs for the Microkinetics NM400E Cable SCSI50M to DB25M & Cable SCSI50M to DB25M/DB15M Cables... I Cannot see Paying $50.00 - $75.00 for a Cable that costs $7.00 SCSI 50M Cable on eBay + a $2.00 DB25 Connector! Unless I cannot find the pin-out.
Results 1 to 3 of 3
-
09-29-2014, 03:34 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 234
Microkinetics NM400E Cable SCSI50M to DB25M Cable Pin-Out
-
09-30-2014, 01:46 AM #2
Registered
- Join Date
- Jan 2009
- Posts
- 234
Re: Microkinetics NM400E Cable SCSI50M to DB25M Cable Pin-Out
I found the pin-out for the MN400 I just need to find the pin-out for the DriveRack Model # 3400-304 DB25 Connector.. What would also be nice is to get manual for the Drive Rack. I had no luck with MicroKinetics in getting a manual the phone call was brief and short not very helpful customer service this CNC kit was partially installed never ran! They have the manual online for the Newer Drive Rack with the Integrated MN400 but not the older one! Any help would be grateful!
Photo of the Drive Rack Back Side.
-
10-01-2014, 10:29 PM #3
Registered
- Join Date
- Jan 2009
- Posts
- 234
Re: Microkinetics NM400E Cable SCSI50M to DB25M Cable Pin-Out
Ok, got an E-mail from Microkinetics the breakout for the 25 pin is the same as the Optistep. http://www.microkinetics.com/pdfmanu...25wirediag.pdf
Reply With QuoteSimilar Threads
-
Cool Muscle, Cable, Substiute for Y Cable, Cool Link, CM-136
By Robiz in forum News AnnouncementsReplies: 0Last Post: 01-14-2014, 05:50 AM -
Looking for a cable
By groundhog719 in forum Syil ProductsReplies: 2Last Post: 12-03-2011, 01:33 AM -
AC power cable in the same cable carrier with motor cables
By bandtank in forum CNC Machine Related ElectronicsReplies: 12Last Post: 06-02-2010, 12:06 AM -
Cable carrier competition: The way you use your cable carriers could earn you a cash
By igus in forum News AnnouncementsReplies: 0Last Post: 01-22-2010, 07:06 PM
Tags for this Thread
Posting Permissions
