586,047 active members*
3,906 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mazak, Mitsubishi, Mazatrol > In search for a 10,000 RPM Mazak H400N motorized spindle 40 taper w. spindle throug

Thread: In search for a 10,000 RPM Mazak H400N motorized spindle 40 taper w. spindle throug

Results 1 to 2 of 2
  1. 10-09-2014, 08:59 PM #1
    oliverhanisch
    oliverhanisch is offline Registered
    Join Date
    Dec 2012
    Posts
    19

    Question In search for a 10,000 RPM Mazak H400N motorized spindle 40 taper w. spindle throug

    :willy_nilly:

    :drowning:

    Hi all,

    I am in the process of sorting my options to either rebuild my current spindle which could be in the neighborhood of $15,000-20,000 or finding a used one from a part-out.

    If anybody knows a shop that has dealt with that spindle in particular and can add more information to my research process that would be greatly appreciated.

    Also, does anyone know what happened to Mike Moles who ran or is still running Spindles Plus? I left two messages the last couple of days and have tried reaching him several times within the last 6-8 months to no avail.
    I also send him an email today.


    Any input or help is greatly appreciated for this project.

    :drowning:

    Oliver
    Reply With Quote Reply With Quote
  2. 10-10-2014, 05:40 PM #2
    oliverhanisch
    oliverhanisch is offline Registered
    Join Date
    Dec 2012
    Posts
    19

    Re: In search for a 10,000 RPM Mazak H400N motorized spindle 40 taper w. spindle thro

    Never mind, I got in touch with Mike Moles.... and voila, I have my spindle problem solved ;-) :bowdown:
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 1991 H400N 370 spindle over heat alarm M32 controller
    By oliverhanisch in forum Mazak, Mitsubishi, Mazatrol
    Replies: 5
    Last Post: 03-29-2013, 07:30 PM
  2. spindle taper
    By tonche in forum Uncategorised MetalWorking Machines
    Replies: 5
    Last Post: 08-13-2012, 01:12 PM
  3. 1MT spindle taper
    By captianpattson in forum Benchtop Machines
    Replies: 8
    Last Post: 07-03-2012, 05:18 AM
  4. Newb Question: Difference Between 40 Taper spindle and a 50 taper spindle
    By AndrewJP in forum Uncategorised MetalWorking Machines
    Replies: 5
    Last Post: 09-18-2010, 12:00 AM
  5. Has anyone got the 30-taper spindle?
    By digits in forum Tormach Personal CNC Mill
    Replies: 66
    Last Post: 07-24-2008, 03:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules