Hi,
I need to drill tube sheets for heat exchangers on cnc drilling machine using carbide insert drills..
Few of them are solid Titanium and balance are Titanium clad.
Facing problem of tool breakage and size variation.
Can I have some guidance here ?
Thanks
Thread: Ti tube sheets drilling
Results 1 to 1 of 1
-
10-15-2014, 01:21 PM #1
Registered
- Join Date
- Oct 2014
- Posts
- 1
Ti tube sheets drilling
Reply With QuoteSimilar Threads
-
drilling a tube
By MAS in forum SheetCamReplies: 3Last Post: 12-23-2015, 06:25 AM -
problem with PSU wiring for 80W Reci CO2 tube - only getting 4 mA output to tube
By gbatten in forum Laser CO2 Tubes, Diodes, RF and Power SuppliesReplies: 3Last Post: 01-06-2015, 12:53 AM -
any standard design to attach end of a tube to a plate & allow tube rotation?
By cknicker in forum Mechanical Calculations/Engineering DesignReplies: 3Last Post: 03-26-2014, 11:19 PM -
I changed from synrad rf laser tube to glass tube and it is not working good
By david Neumann in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 09-15-2012, 03:22 AM -
Drilling tube on lathe is offcentered
By horst007 in forum MetalWork DiscussionReplies: 2Last Post: 12-18-2008, 03:51 PM
Tags for this Thread
Posting Permissions
