586,119 active members*
3,538 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > 5 axis controller wiring problem

Thread: 5 axis controller wiring problem

Results 1 to 3 of 3
  1. 10-11-2014, 07:09 AM #1
    griff
    griff is offline Registered
    Join Date
    Apr 2005
    Posts
    6

    Angry 5 axis controller wiring problem

    :I had 5 axis controller built for me using dugong servo drives and amt103 encoders the purple wire on cui-435 connector should not be connected and all 5 drives are answering to cnc drives soft ware all five servo motors will not respond to tuning in mach3 but all five servo motors will turn at once when switching the controller off and when tuning one axis the same thing happens
    Thanks Griff
    Reply With Quote Reply With Quote
  2. 10-12-2014, 02:11 AM #2
    Larken
    Larken is offline Member
    Join Date
    Feb 2007
    Posts
    966

    Re: 5 axis controller wiring problem

    You should contact the person that built it for you. Maybe they could help you out.
    Reply With Quote Reply With Quote
  3. 10-12-2014, 05:52 AM #3
    griff
    griff is offline Registered
    Join Date
    Apr 2005
    Posts
    6

    Re: 5 axis controller wiring problem

    Thanks Larken
    I did send the person who built the controller for me message.
    Thanks Griff
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Z Axis auto zero plate wiring on usb motion controller
    By phongshader in forum Chinese Machines
    Replies: 3
    Last Post: 11-10-2017, 02:01 AM
  2. Z Axis Problem with NEW MPC6525 Controller setup
    By TheWorkshopGuy in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 01-16-2014, 11:46 PM
  3. Wiring in an air cylinder controller with 1 Axis
    By glomagno in forum CNC Machine Related Electronics
    Replies: 12
    Last Post: 12-17-2012, 02:29 PM
  4. Four axis Controller Mach3 Configure+Wiring
    By winattitude in forum Controller & Computer Solutions
    Replies: 2
    Last Post: 08-27-2009, 08:12 AM
  5. Problem with 4th axis feedmoves on Fanuc controller 0i-MC
    By rab in forum Fanuc
    Replies: 4
    Last Post: 11-09-2007, 04:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules