I'm a chilean user of CNC router, sorry bad english.
In my area (small workshops) this technology is very rare in Chile and I have no references to evaluate my work. I have learned for myself.
Please help me telling me from the photos, if it is possible to improve this result. For me it is certainly unsatisfactory but the best I get by trial and error.
Attachment 252970 Attachment 252972 Attachment 252974
Wood: Pinus radiata (i think "Monterey pine" in USA, not secure).
Width: 15mm, profile cutting down 3mm each pass.
Tool: 4mm HRC40 carbide flat endmill (2 flutes)
RPM: 10.000
Speed: 1200
The piece takes 1 minute aprox., but requires many time after with sanding and polishing, to get a satisfactory product.
Is this that obtain normally with CNC profile cutting or I need change parameters to get fine cut?
Thanks in advance.