Re: Meshcam pro art 6 smoothing
My advice for image dpi:
Grab the largest image of the source subject you can. I usually draw my images to 1920 x 1280 and save them at 300dpi minimum. I can then import them into Meshcam Pro Art at 250mm x250mm with a Z of 10.5mm and pixels per inch at 12....
Smoothness set to 30 max of at all, and it's lazer smooth walls of the cuts.
The minimum dpi should never be below 300 for good quality output.
If I knew everything, I wouldn't be here asking, but what I do know is that I'm here to help and learn to listen.