Originally Posted by
SCROMAL
Tyler
Try avery paint mask I think that will work
This is the way to do it. The Avery Paint Mask is a self-adhesive film that you can cut/engrave right through, then paint/enamel your part - peel the film away when the paint is dry - and you have perfectly painted engraved lettering/design.
You can order it online, or try some local sign/vinyl shops - they should have it or be able to get it for you.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452