The machine is drifting on both ends. I haven't accurately measured the drift on both ends but looks the same. Major drift is along x axis and there is a minor drift in y axis (left to right) too. I will run a 50% feed rate this evening and let you know.
Results 1 to 12 of 12
Hybrid View
-
10-30-2014, 05:04 PM #1
Registered
- Join Date
- Aug 2010
- Posts
- 26
Re: My new PRO4824 machine - Need help
Jacob
-
10-30-2014, 06:39 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: My new PRO4824 machine - Need help
No, use 50% ACCELERATION.
Originally Posted by niner_zero
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
PRO4824 on the way!
By Inverted CNC in forum Avid CNCReplies: 6Last Post: 12-25-2018, 10:48 PM -
Machine Accuracy Issues PRO4824 Mach3
By pete1961 in forum Avid CNCReplies: 37Last Post: 08-15-2016, 05:18 AM -
CNC PRO4824 - yes its small. =)
By FoxCNC1 in forum Avid CNCReplies: 62Last Post: 06-24-2014, 04:47 AM -
Question about table display window and PRO4824 machine
By kaetamer in forum Avid CNCReplies: 7Last Post: 05-07-2014, 04:56 PM -
CRP2448 vs. PRO4824
By shawnrw in forum Avid CNCReplies: 6Last Post: 02-16-2014, 07:01 PM
Tags for this Thread
Posting Permissions
