Hi,
I have a new 2hp geared head mill, table size is 1000 x 240< that I want to convert to CNC.
I would like suggestions on stepper motor size for all 3 axis.
I have been looking at these - 1 PC Nema 34 Stepper Motor With 878 OZ IN NEW CNC KIT | eBay
Would they be ok to use with a Gecko G540.
Thanks,
Steve
Thread: CNC Conversion
Results 1 to 3 of 3
-
11-01-2014, 05:42 AM #1
Registered
- Join Date
- Dec 2012
- Posts
- 12
CNC Conversion
-
11-02-2014, 12:01 AM #2
Registered
- Join Date
- Jan 2008
- Posts
- 1529
Re: CNC Conversion
NO, the inductance is way too high. Read Gecko's guide on choosing stepper motors.
7xCNC.com - CNC info for the minilathe (7x10, 7x12, 7x14, 7x16)
-
11-02-2014, 02:03 AM #3
Registered
- Join Date
- Dec 2012
- Posts
- 12
Re: CNC Conversion
Ok, thanks and will consult the Gecko guide.
Reply With QuoteSimilar Threads
-
RF-30 Conversion
By Bob La Londe in forum Benchtop MachinesReplies: 14Last Post: 05-23-2012, 09:01 AM -
BF-20 CNC Conversion
By JBV in forum Benchtop MachinesReplies: 95Last Post: 02-08-2010, 06:19 AM -
CNC conversion
By kevin mey in forum Hardinge LathesReplies: 11Last Post: 08-09-2009, 06:08 PM -
Conversion Please!
By kawazuki in forum SolidworksReplies: 2Last Post: 06-25-2009, 07:56 PM -
servo conversion vs stepper conversion
By contractdesign in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 07-26-2008, 08:54 PM
Tags for this Thread
1000,
3 axis,
axis,
cnc,
cnc conversion,
conversion,
convert,
ebay,
g54,
g540,
gecko,
gecko g540,
head,
mill,
motor,
size,
stepper,
stepper motor,
stepper motor size,
steve,
table,
version
Posting Permissions
