Well its been a long time coming but I'm close to getting my router table up and running. I decided to change the router to a spindle motor for more control and the reduction in sound volume you get with a spindle, also the handles on my router were reducing the usable width of my Y axis. I've bought a 3kw air cooled spindle from Ebay that comes with a 5 pin han connector and I have a 3rd gen 5 axis breakout board. looking at the info I revived with my breakout board I have one spindle control interface block that takes 1 wire from the spindle and another from the power transformer this is making me wonder what HOW AM I SUPPOSED TO WIRE THEM UP? There was no paperwork with the spindle and from looking at the 5 pin han connector I have pins 1 2 3 4 and earth. can anyone please help me.

Thanks for any assistance you are able to offer.