Hi all I have a problem with Bobcad V26 not producing Z helical moves in code when contour ramping but shows it doing so in simulation. I suspect the Post Processor attached.
Any Help would be appreciated
Hi all I have a problem with Bobcad V26 not producing Z helical moves in code when contour ramping but shows it doing so in simulation. I suspect the Post Processor attached.
Any Help would be appreciated
The more I learn, the more I find there is to learn
Regards Nick
Your machine does not support helical ramping.
Go to your feature, and under posting select line moves. It defaults to arc moves.
Look in paragraph 64 mine reads
64. Arc move xy.
n, g_arc_plane, g_arc_move,x_f,y_f, z_f, arc_center, feed_rate
Bet you dont have z_f
should work
add x_f to paragraph 65 and y_f to 66 incase you use slice plainer with odd lace angles with arc moves.