Hey guys,
We have a 1996 Fadal VMC 2216. We've been having some problems with our A-axis on our TR-65 Rotary Table.
We just got a used A-axis amplifier, AMP-0015 (0038-4) GM-4050/Reliance. The directions on it state to:
1. Turn CUR fully CW (15 turns)
2. Turn COMP pot CW until oscillation then CCW for 1 1/2 turns (smooth during motion)
Now since it's used, we don't know if they have been turned already. Is there any way to tell?
Thanks