512,859 active members
3,312 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Hiding toolpaths...
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Sep 2005
    Posts
    249

    Hiding toolpaths...

    How do you hide existing toolpaths? I get so many operations going, that I can't clearly see the lines I need to make other operations. There must be some way. I couldn't find anything in the help file or in this forum. Any help would be greatly appreciated!

  2. #2
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Posts
    3535
    Put the curser in the main window then hit "Alt" & "T" and it will togle them off. What version are you running as there are other ways to?
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .

  3. #3
    Registered
    Join Date
    Nov 2005
    Posts
    174
    If you are using X Mr2, there are two new tabs in the ops manager. One shows the toolpath for the selected operation, and the other shows the geometery associated with selected toolpath. You can get more info on the mastercam web page, they have videos showing this.

  4. #4
    Registered
    Join Date
    Sep 2005
    Posts
    249
    Thanks! That worked. I'm running X right now. I can finally see the work piece!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •