The existing belt is now non-existent, it literally fell to pieces while running the machine today. So I don't have the old one to look at or measure and I cannot seem to locate any part guide for this machine. So I was wondering if anyone can help with a part number or source? It looks to be 158x10mm from my measurements, but I'm not sure what the tooth count needs to be. Also, judge from the thin "wire" I had to clean up around the pulled, I assume this belt needs to be reinforced with metal or carbon threading?
I believe its year of manufacture is 2008 and its a 5x10 with ATC if that matters.
Thanks, In Advance.