Has anyone ever used a linear axis for rotary spindle control. I have a deskcnc 1st gen. controler on my Hardinge lathe conversion. The a axis is already being used for a rotary tool changer. The spindle motor is a dc servo with 500 count encoder.
I know I will likely have to buy 2nd gen. card, but just in case.
Frank
Thread: y axis for spindle control ?
Results 1 to 2 of 2
-
08-28-2006, 10:39 PM #1
Registered
- Join Date
- Aug 2004
- Posts
- 61
y axis for spindle control ?
-
09-10-2006, 04:45 PM #2
Registered
- Join Date
- Aug 2004
- Posts
- 61
Ok then! Has anyone used Deskcnc 2nd generation card to control spindle speed and direction on a dc motor spindle with encoder feedback, if so how well does it work and how easy is it to set up please?
Frank
Reply With Quote
Posting Permissions
