Hi I bought a 2nd hand lathe Emco Turn 140 which is a 2 year ago retrofitted
with Mach3 (version R3.042.040) and an I / O board Pokey55 software Pokey 55
software V2.1.15






Perhaps the / transport (der) shaken loose some electrical wires (fixed
everything put back) and since then there are strange things with the MPG
which is controlled by the Pokey55 ..






Now I thought Mach3 to update to the latest version R3.043.066 >> but it
works with the old existing Pokey 55 software V2.1.15> if so should be
rewritten the scripts for the Toolchanger VB ???






Please your experience / advice






thx