I'm willing to build a CNC lathe. The most important part for me is the spindle motor. As far as I know it must be a servo to control the revolutions for threading.
The distance between centers will be 400-450mm so it is not that big but I will cut hard stainless steel or equivalent materials in hardness. Can you help me finding a suitable servo motor that is not so expensive.
I found this motor on e bay but I don't know if it is strong enough for the machine.
New Dunkermotoren BG63X55 Brushless DC Servo Motor PLG52 GearHead B CNC DIY | eBay
Thanks in advance
Suat