G91G01X30Y40F100
in this line x axis will move F100 OR less feed rate..
G91G01X30Y40F100
in this line x axis will move F100 OR less feed rate..
Slower.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
How to calculate x axis movement feed rate
it will go slower most of the time, but if Y axis is already at 40 X axis will go at F100
F100 is the maximum feed rate to reach your starting area for both X and Y axis
so if Y axis is at 40 on your table you just have 1 axis to moved so X axis will move at F100
if X axis is at 0 and Y axis is at 10, both X and Y axis will go at the same feed rate because they have to move 30 off on each axis
so the feed rate is a combination of both x and Y axis